SUS304 Cartridge Heater With Quartz Tube And Ceramic Terminal
The heating element can be made in different shape: round , square , retangular...
The heating tube is made of surface anti-oxidation insulated
electric wire and high-quality quartz tube / Ceramic tube.
It can be tightly wound and used vertically, with the
characteristics of fast heating and long service life.
It can be installed and used in any direction without protection
atmosphere or vacuum protection.
It is easy to assemble and low in cost.
The maximum service temperature can reach 1300 ℃, and the service
life shall not be less than 20000 hours.
Widely used in all kinds of electric heaters and heating equipment,
especially suitable for making heating elements in devices such as
high temperature far-infrared radiator, electric oven, etc.
Types:
Stainless Steel heating element
Normal steel tubular heating element
steel heating element with copper coated
Aluminum heating element .
Infrared quartz heating element
Copper heating element
heater plate
heating plate
SUS304 Cartridge Heater With Quartz Tube And Ceramic Terminal
OEM designed customized heating element and heater for different kind of electric appliance: home
appliance and electric industrial equipment
Stainless Steel Finned tubular heating elements for forced air
heating is designed for use in natural and forced convection space
heating. our range of finned air heaters are suitable for increased
heat transfer surface area and where higher wattage is required.
Featuring rugged construction, these finned heaters can be used in
a multitude of industrial environments.
Finned tubular heaters are used for forced convection heating, air
or gas heating heating systems. Finned tubular heaters/heating
elements are customized to meet your specific application needs.
SUS304 Cartridge Heater With Quartz Tube And Ceramic Terminal
| Sheath material | Stainless Steel 304/321/316,Incoloy800/840 |
| Heat intensity | Not exceeding 30Wcm2 (advisable) |
| Tolerance of length | +/-1.5% |
| Tolerance of diameter | -0.01 a -0.06 m/m |
| Escape of current (when cold) | ≤0.1mA a 242 v |
| Insulation (when cold) | 5 Min Ohmios 500 Watts minimum |
| Dielectric strength | 1500v. 1/seg |
| Tolerance of cut of connexion | +/-15 mlm |
| Power tolerance (w) | Power tolerance (w) |
| Wattage tolerance | +5 percent, -10 percent
|
Features:
1, Mechanically-bonded continuous fin assures excellent heat
transfer and helps prevent fin vibration at high air velocities.
2, Tube diameter: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm
3, Several standard formations and mounting bushings available.
3, Standard fin is SUS304, other Sheath and fin material available
4, 120V, 208V, 240V, 480V available, Special voltage/wattages
avaiable
5, Various shape: Straight type, U type, W type, Roud type and so
on
When you inquiry, pls sspecify the following details
1) If have drawing, it will be helpful.
2) Power, voltage, shape
3) Working temperature
4) Material requirement
5) Quantity
6) Other requirement required.
